Other guitar parts, string guides, battery compartments etc.
.047 mfd ceramic disc capacitors. Sold per 1pc.
Truss Rod Nut for Gibson Guitars, Brass 10-32
Truss Rod Cover to fit Gibson, Black, with White Trim
Bass String Guide Round with Screw, Chrome
String Guides x2, Flat Wavy Style, with Screws and Spacers for Guitar, Nickel. Pilot hole recommended before installing.
9-volt battery compartment for acoustic guitar. Top portion outside the instrument is 50 x 30 x 4 mm. Bottom portion resting inside the instrument is 32.5 x 23 x 51 mm.
Humbucking pickup ring set , 1 short neck ring and 1 tall bridge ring, flat bottoms, Slanted. Chrome finished plastic. Outside dimensions 3-5/8 in. X 1-13/16 in. Inside dimensions 2-13/16 in. X 1-1/2 in. Bridge Taper 1/4 in. - 3/16 in. Neck Taper 5/32 in. - 1/8 in.
Black Humbucking pickup ring set, 1 neck and 1 bridge. Slanted with curved bottom. Frequently used on Gibson Les Paul. Mounting screw spacing 81mm center to center. Outside dimensions 3-1/2 in. X 1-3/4 in. Inside dimensions 2-3/4 in. X 1-1/2 in. Bridge Taper 3/8 in. - 5/16 in. Neck Taper 7/32 in. - 5/32 in.
Vintage style cloth covered wire set. Vintage Style, push back, cloth covered wire, 22 gauge, unshielded, single conductor, stranded wire with a waxed braided cotton outer insulation. Includes 3.5 ft of black GW-0820-023 wire and 3.5 ft of white GW-0820-025 wire.
Barrel String Guides x2 with screws for Guitar, Chrome plated.
String Ferrules, 4 pieces, for Bass, Nickel, half inch flange diameter, 3/8 in. diameter hole required, 13/32 in. total length.
Neck Plate, 4 Hole, for Guitar or Bass, Chrome. The plate is 2 inch x 2-1/2 inch. Screw holes are spaced 1-1/2 inch x 2 inch
String Ferrules, 6 pieces for Guitar, Chrome plated, 25/64 inch diameter flange and requires a 5/16 inch diameter hole. Overall depth is 11/32 inches.
Taylor Guitars ES 9V Sensor Harness.
Taylor Guitars ES Dummy Coil.
Taylor ES 9V Preamp W/Controls RH.