• Increases functionality and control over compatible devices• Compact, durable, easy-to-use• Works with EHX pedals and those made by other makers• No power required• Comes with a TRS (Tip-Ring-Sleeve) cable
The Switchblade+ offers a convenient solution to a players switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.
Want to recall a preset of your Favorite settings on your Brigadier, Deco, DIG, El Capistan, Flint, Lex, or Riverside? Or remotely tap tempos for your BigSky, Deco, DIG, Flint, Mobius, or TimeLine? Or engage the Boost or Favorite on your Riverside? Add our tiny MiniSwitch and connect to your Strymon pedal with the included 1/4″ TRS cable.
The Lehle Dual SGoS is the second evolutionary stage of the highly successful programmable switcher for two amps plus tuner. This unit makes it possible to play through two amplifiers individually or simultaneously, either as a stand-alone unit or in a network with other Lehle SGoS switchers. A particularly popular combination is the Lehle Dual SGoS with...
There can't be anyone, anywhere, who doesn't know what a drag it can be swapping cables when changing instruments during a gig! So eliminate it - with the Lehle 3at1 SGoS! This True Bypass pedal switches the signals from magnetic and piezo pick-ups just as free of losses and background noise as it does line signals. The secret is in its...
The MXR Tap Tempo switch features adjustable tip/ring configuration so you can control the delay time of a wide variety of delay pedal types. This pint-sized footswitch is ruggedly built for a lifetime on the road.
The Meris Preset Switch is the easiest way to save and access up to 4 different sounds on any one or more Meris pedal(s).
The optional extra ‘Wet’ pedal will allow you to toggle the dry signal off completely and use your guitar as a string or organ-like pad.
Swiss Things™ combines two true-bypass Flexi-Switch™ enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction...
The Source Audio Tap Tempo Switch is a simple footswitch that adds significant functionality to every One Series pedal in the Source Audio collection. It offers on-the-fly tap tempo control over modulation rates for the Vertigo, Lunar, Gemini, and Mercury as well as delay times for the Nemesis. The Tap Tempo also makes it possible to externally scroll...
The Switchblade Pro is a deluxe switching box featuring true mechanical bypass, soft switching, high quality and low noise buffers, volume controls for all input signals, high headroom and a multitude of possible configurations for all your signal routing needs. This compact pedal is a versatile and indispensable tool!
MultiSwitch Plus can be configured in several different ways to extend floor control of compatible Strymon pedals. Depending on the selected mode and the pedals connected, you can recall presets, change banks, operate TimeLine’s looper, remotely tap tempos, and more.
• ABY switche• ABY switcher (A or B or both)• Hum and noise-free switching• High-impedance LEHLE TRANSFORMER HZ with phase and ground switch• Two different operating modes• Stereo-routing option• Active pop suppression circuitr (A or B or both)• Hum and noise-free switching• High-impedance LEHLE TRANSFORMER HZ with phase and ground switch• Two different...
True Bypass effects looper and AB switch Hum-free and noiseless switching Three different operating modes: Latching, Momentary or Mixed Mode Mono and stereo functionality Active pop suppression circuit
Footswitch for Timeline, BigSky and Mobius, Loop Control mode (Timeline only), Bank mode, Preset mode, Tap mode, no additional power supply required, incl. stereo jack cable
The optional foot controller lets you save and recall up to 100 presets with the 8 Step Program main unit.
Controls bank up/down selection on the 22500 Dual Stereo Looper. Can increment or decrement one or ten banks at a time, Uses a standard inch mono instrument cable as the connection
The 45000 Foot Controller allows you to use your 45000 remotely, with your feet! Provides instant access of up to 100 loops per SDHC card. Gives you access to Track Select, Record, Play, Loop Up and Loop Down. Large dual digit display indicates the 45000's current loop number. The Foot Controller obtains all of its power from the 45000 using a standard...
FS3X provides increased functionality and convenient Hands-free control over UP/DOWN selection of Models, Mode changes, Loop selection, auto START/STOPS and arms auto record where applicable.
ExP Controller unleashes the full functionality of your Neunaber Expanse-series pedal. Four programmable effects with two presets each, three expression inputs (one for each knob), and a Preset Morph expression input. Multi-color LEDs uniquely identify effects/presets and are easily seen from a distance.
Custom shop ABY pedal to switch between two amplifiers, switching option between A/B and BOTH, two buffered outputs (one output with phase switch) and galvanic isolation by transformer, internal voltage-doubler from 9V to 18V, powered via 9V battery or optional power supply (not included)
The Lehle 1at3 SGoS is a programmable True Bypass switcher that lets you switch backwards and forwards between up to three amplifiers, when you want, as often as you want.In combination with jack socket C→B, output C can also be used alternatively as an effect loop for amp B, excluding all the effects you don't currently need from the signal path.
A good solid A/B box can be a guitarist's best friend. JHS make theirs from a Hammond 3.8 x 9.1 cm metal enclosure with high quality jacks and switch. JHS also includes a dual color (red/blue) LED to let you know by sight if you're using A or B. This is very practical in a live situation.
Use the Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1/4” instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting.