Voodoo Lab gear is manufactured and tested in California. The company started with MIDI-switchers and effect pedals, after which they became the leading power supply manufacturer in the world. There are hundreds of gigs every day that run with Voodoo Lab Pedal Power supplies. They are simply the most durable and efficient in their field.
The most widely used power supply cable. 2.1 mm connector fits to 99% of all pedals. Originally known as Boss-standard, today used by every manufacturer all around the world. Standard polarity, center negative. 46 cm (18") Right angle plugs.
A cable with a 2.1mm right angle barrel and a 3.5mm right angle mini plug with standard (tip positive) polarity. The 3.5mm mini plug cable connection is compatible with older/vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat series), Klon Centaur, and vintage (non-LED) Voodoo Lab pedals.
Voodoo Lab Pedal Power 3 is equipped with 8 isolated 500mA outputs delivering robust power for modern DSP effects and audiophile specs for the most sensitive vintage stompboxes. X-LINK ports for expanding with Pedal Power X4 or X8. Hand-built in the U.S.A.
Voodoo Lab Pedal Power 3 PLUS is equipped with 12 isolated 500mA outputs delivering robust power for modern DSP effects and audiophile specs for the most sensitive vintage stompboxes. X-LINK ports for expanding with Pedal Power X4 or X8. Hand-built in the U.S.A.
Four 9V isolated high-current 400mA output sections (2 with 12V option) power Strymon, Eventide, Line 6 (excludes M9/M13), Boss Twin, TC Electronic Nova, Moog and more, Four 9V isolated 100mA output sections, All outputs compatible with 9V battery operated pedals, Linear regulation and toroidal transformer for lowest possible noise, easily fits small to...
Connect two pedals to one power supply output, without hum or noise. Voltage stays the same, but amperes are divided for two pedals according their current draw. This cable enables you to get more out from your power supply.
A battery snap works with any effect that runs on 9V battery including vintage pedals without power jacks.
Some pedals use higher voltage than normal 9 volts. With this cable you can combine two outputs from your power supply. This way you can double the voltage to suit pedal requirements. Combine two 9 volt outputs for 18 volts, Combine two 12 volt outputs for 24 volts, 2,1 mm adapter, Normal polarity, center negative.
A cable with 2.1mm right angle connectors and reverse (center positive) cable polarity made for JangleBox, some Fulltone pedals, some Moogerfooger and others.
For pedals with higher performance requirements (mA) you can use a current doubling adapter to combine two isolated multi power supplies. Power supply: 2 x 2.1 mm coaxial plug. Pedal connector: 2.1mm coaxial socket. Polarity: Standard (centre minus). Length: 10 cm
The most widely used power supply cable. 2.1 mm connector fits to 99% of all pedals. Originally known as Boss-standard, today used by every manufacturer all around the world. 2.1mm Right Angle Barrel Plugs Standard Polarity (Centre Negative) 24" / 61cm Long
A cable with 2.1mm and 2.5mm right angle connectors and reverse polarity (center positive) cable. Suitable for line 6 DL4 / MM4 digital modelling, eventide factor, some Electro-Harmonix pedals and Voodoo Lab pedal switcher and control switcherPower supply connection: 2.1 mm angle coaxial connector Pedal connection: 2.5 mm angle coaxial connector...
Pedal Power X4 is a professional isolated power supply for up to four battery operated or high current DSP effects. Housed in an ultra-compact aluminum chassis, the virtually weightless X4 mounts to even the smallest pedalboards, including Voodoo Lab Dingbat TINY and Pedaltrain® Nano. Pedal Power X4 delivers the pure and reliable power necessary for...
Voodoo Lab Pedal Power X4 Expander Kitit adds four 9 V isolated outputs to an existing power supply using any available 12 V high current (400 mA - 1A) output. Housed in an ultra-compact aluminum chassis, the virtually weightless X4 easily mounts to even the most crowded pedalboards. Pedal Power X4 delivers the pure and reliable power necessary for pedals...
• Provides easy-access guitar and amp connections to pedalboard • Accepts mono or stereo TRS connections • Mounts beneath right or left sides of Dingbat pedalboard • Easy installation with included mounting screws • Dimensions: 3.25” x 2” x 1.25” Weight: 3 oz (0.1 kg)
Four Unique Preamp/Gain Voicings, Body & Air Fine-Tuning Circuits, True Bypass via High Reliability Gold-Contact Relay, Plexi Top Panel, Hand built in the U.S.A.
Create multiple, layered amp sounds - one clean, one overdriven, Four unique overdrive/distortion circuits: Stock, Lead, Rhythm & High Gain, clean boost circuit with tons of output, True bypass switching via gold-contact relay with LED, Plexi Top Panel , Hand built in the U.S.A.
Switch channels on multiple amps and easily automate any non-MIDI functions with Control Switcher. 4 isolated relay controls, Front panel instant access buttons, Separate 1/4" mono jacks, Multi-DIN connector for modern amps, Controls any footswitch function, Phantom powered by GCX or Pedal Switcher via MIDI cable, Compatible with Ground Control Pro or any...
Simultaneous control of up to 8 MIDI devices, 8 assignable instant access switches, Controls up to 4 GCX Guitar Audio Switchers, Bright, stage-friendly alphanumeric display, Name each preset, Use volume/expression pedals for real-time control of your sound via MIDI continuous controller messages, Hand built in the USA
8 true bypass audio loops, 2 front-to-back feedthroughs, Choose between buffered and passive inputs, A/B switching to select amp and preamps, Controls any footswitch function, Phantom powers Ground Control Pro via MIDI cable, Hand built in the U.S.A.
True Bypass Audio Loop Switcher, 6 true bypass audio loops using the finest gold contact relays, Instantly recall preset combinations of effects, Isolated loop for A/B, amp channel select and remote tap tempo, Compact size easily fits on rack shelves and pedalboards, Rackmount 2 units into a single space with optional bracket, Compatible with our Ground...
Voodoo Lab PX-8 PLUS is a true bypass programmable pedal switcher that transforms any pedalboard into a powerful yet easy to use tool for organizing and optimizing the performance of your effects and MIDI devices.
Universal Power adapter, 4x 9 / 12V 100mA, 2x 9V 250mA, 2x 9V 100 mA or combination of multiple outputs at 18V or 24V, Two of the 8 outputs allow you to SAG the voltage from roughly 4V to 9V. Especially interesting for Fuzz and Wah pedals, High quality toroidal transformer, Very low background noise - all outputs are short-circuit protected and filtered,...
Dingbat TINY is designed to be the ultimate professional travel board. Secured in its tour-grade gig bag, TINY is compact enough to stow easily in the overhead compartment or beneath the forward seat of any aircraft. Combined with Pedal Power X4, Dingbat TINY becomes a complete pedalboard solution anywhere in the world your music takes you.