Other guitar parts, string guides, battery compartments etc.
.047 mfd ceramic disc capacitors. Sold per 1pc.
Vintage style cloth covered wire set. Vintage Style, push back, cloth covered wire, 22 gauge, unshielded, single conductor, stranded wire with a waxed braided cotton outer insulation. Includes 3.5 ft of black GW-0820-023 wire and 3.5 ft of white GW-0820-025 wire.
Truss Rod Nut for Gibson Guitars, Brass 10-32
Emerson Paper In Oil Tone CapacitorsConstructed with the finest materials. Comparable to the famous and sought after Vintage Sprague Vitamin Q Capacitors.
9-volt battery compartment for acoustic guitar. Top portion outside the instrument is 50 x 30 x 4 mm. Bottom portion resting inside the instrument is 32.5 x 23 x 51 mm.
String Ferrules, 4 pieces, for Bass, Nickel, half inch flange diameter, 3/8 in. diameter hole required, 13/32 in. total length.
Truss Rod Cover to fit Gibson, Black, with White Trim
String Ferrules, 6 pieces for Guitar, Chrome plated, 25/64 inch diameter flange and requires a 5/16 inch diameter hole. Overall depth is 11/32 inches.
Taylor ES 9V Preamp W/Controls RH.
The two way truss rod wrench can be used on both the two way adjustable rod necks or single adjustable rod.
Back Plate & Switch Cover for Les Paul® Black 1-ply
Neck Plate, 4 Hole, for Guitar or Bass, Chrome. The plate is 2 inch x 2-1/2 inch. Screw holes are spaced 1-1/2 inch x 2 inch
5/16 inch Box Truss Rod Wrench, suitable for many Gibson guitars. With Phillips Head Screwdriver on End. Socket length ~.375" Outside diameter of the socket is 11.05 mm. The distance from the top of the tool's arm to the end of the socket is 12 mm. Use these measurements to determine if this tool will reach your truss rod nut.
Sprague "Orange Drop" #715P .022 mfd 200 volt Capacitor. Sold per 1pc.
Chrome Metal bridge cover for P. Bass
Emerson Paper In Oil Tone CapacitorsConstructed with the finest materials. Comparable to the famous and sought after Vintage Sprague Vitamin Q Capacitors. Price per 1 piece only!
Features a new production Polystyrene Capacitor wired in Parallel with a mil-spec 1% tolerance 220K Ohm Metal Film Resistor. The use of a Treble Bleed helps to retain clarity on the high frequencies when rolling down the volume pot. This also helps to make the taper feel more natural.