Lehle based out of Germany, manufactures switchers based on the needs not just of rock stars, but the everyday musician. Sleek design, solid powder-coated steel enclosures, large, cool LEDs and innovative new switching technology give these pedals instant allure. Not only will they not interfere with your tone; they may actually improve it. Founder Burkhard Georg Lehle has built his switchers from the ground up, filling a much needed gap in the music equipment industry.
Expression Pedal with 2 outputs Controls all common devices with expression inputs Magnetic sensor technology, without mechanical wear Precise control from digital potentiometers MIDI via USB Optimised size and weight
The LEHLE SWITCH BTN-C is technically identical to the LEHLE SWITCH BTN. At the end of the leads is a 2-pin PCB connector. Thus, it can be installed easily without soldering e.g. into Strymon pedals.
The LEHLE SWITCH BTN is a momentary foot switch. It is housed in an M12 threaded enclosure made of stainless steel. Thanks to the gold plated contact material its life span is at least one million switching cycles electrically and mechanically. The LEHLE SWITCH BTN withstands an actuation force of 1,000 N, which is a force equivalent to approximately 100...
Isolator and DI box Absolutely no signal loss or hum High-impedance LEHLE TRANSFORMER HZ Suitable for balanced or unbalanced signals Passive – no need for a power supply
Analogue signal path – digital control High-end preamp with discrete Class-A input stage 120 dB dynamic range thanks to 30 V technology Magnetic sensor technology, without mechanical wear Precise volume control from analogue VCA MIDI via USB Optimised size and weight
The Lehle Dual SGoS is the second evolutionary stage of the highly successful programmable switcher for two amps plus tuner. This unit makes it possible to play through two amplifiers individually or simultaneously, either as a stand-alone unit or in a network with other Lehle SGoS switchers. A particularly popular combination is the Lehle Dual SGoS with...
The Lehle 1at3 SGoS is a programmable True Bypass switcher that lets you switch backwards and forwards between up to three amplifiers, when you want, as often as you want.In combination with jack socket C→B, output C can also be used alternatively as an effect loop for amp B, excluding all the effects you don't currently need from the signal path.
There can't be anyone, anywhere, who doesn't know what a drag it can be swapping cables when changing instruments during a gig! So eliminate it - with the Lehle 3at1 SGoS! This True Bypass pedal switches the signals from magnetic and piezo pick-ups just as free of losses and background noise as it does line signals. The secret is in its...
The Lehle Mono Volume is a volume pedal equipped with a precise magnetic sensor enabling it to operate almost wear-free. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. In the Lehle Mono Volume the Hall sensor, which is made in Germany, is accurately calibrated to the built-in magnet and the control...
The Lehle Mono Volume 90 is a volume pedal equipped with a precise magnetic sensor enabling it to operate almost wear-free. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. In the Lehle Mono Volume 90, the Hall sensor, which is made in Germany, is accurately calibrated to the built-in magnet and the...
• Passive splitter and DI box• Absolutely no signal loss or hum• High-impedance LEHLE TRANSFORMER HZ with phase and ground switch• Suitable for balanced or unbalanced signals
The Lehle Stereo Volume is a volume pedal equipped with a precise magnetic sensor enabling it to operate almost wear-free. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. In the Lehle Stereo Volume, the Hall sensor, which is made in Germany, is accurately calibrated to the built-in magnet and the...
• ABY switche• ABY switcher (A or B or both)• Hum and noise-free switching• High-impedance LEHLE TRANSFORMER HZ with phase and ground switch• Two different operating modes• Stereo-routing option• Active pop suppression circuitr (A or B or both)• Hum and noise-free switching• High-impedance LEHLE TRANSFORMER HZ with phase and ground switch• Two different...
True Bypass effects looper and AB switch Hum-free and noiseless switching Three different operating modes: Latching, Momentary or Mixed Mode Mono and stereo functionality Active pop suppression circuit
Stereo split, summing, double DI box and problem solver Hum-free and lossless splitting and isolating Two high-impedance LEHLE TRANSFORMER HZ Phase and ground switch per channel Suitable for unbalanced or balanced signals Passive – doesn’t need power
The Lehle D.Loop SGoS recommended as the centerpiece of your pedal-board management system, a programmable double looper that takes inactive effects out of the signal path. The loops can be used independently of each other. An adjustable buffer is additionally available in every situation and - because not all effect pedals have a volume controller - can...
These MIDI cables are used to connect Lehle SGoS Switcher to standard MIDI equipment. The robust cables, with their metal TRS and DIN connectors
The Lehle DC Filter eliminates DC voltage from analog signals. Audio signals containing DC voltage cause ugly switching noise. Now, both line and high-impedance signals are cleaned - but with no loss of sound. The DC Filter is of full stereo type, and thus filters stereo - and, of course, mono - signals. This little aid can even process balanced signals....
The Lehle Sunday Driver SW is a compact-format high-end preamp for all types of electrical and acoustic instruments - a preamp that enables electric guitars and basses, acoustic guitars, and also other stringed instruments (such as violins, cellos and double basses) to realize all of their musical potential. The switchable version expands the classical...
The Lehle MIDI Junction networks up to four Lehle Lehle SGoS Switchers via standard stereo jack-plug adapters, using MIDI program-change commands for communication between the individual Switchers. External MIDI equipment that responds to MIDI program-change commands can also be connected by means of a five-pole DIN socket. Combination of multiple MIDI...
• High-end preamp, buffer and booster• Discrete Class-A input stage• 130 dB dynamic range thanks to 30 V technology• Select between Buffer and Booster modes• Neutral, studio quality sound• Boost up to +18 dB• Balanced Output can be used as a DI-box, with phantom power
• True-Bypass parallel effects looper and stereo mixer• Discrete Class A input stages• 122 dB dynamic range thanks to 30 V technology• Latching, Momentary or Mixed Mode operation• Mono and Stereo functionality• Active pop suppression circuit