No products
Catalog
Guitar pots, CTS, Emerson, Allparts, 250K, 500K, push-pull etc.
TAD CTS 500K Vintage Audio Dimple...
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer. Split/knurled shaft, medium 9.5mm bushing Original Specs for Gibson Les Paul® or PRS guitars (check for actual bushing length required)
7,50 €In Stock
0,60 € In StockAllparts Brass Pot Sleeves
Convert split shaft pot to solid shaft pot, for pot knobs with fixing screw, Inside diameter approximately 6,3 mm. Price per 1pc.
0,60 €In Stock
9,90 € In StockCTS Long Shaft 500K Split Shaft Pot
CTS brand 500K audio taper pots. 3/4 inch threaded bushing with 3/8 inch diameter. 24 spline split knurled shaft. Includes nuts, locks, and dress washers. Popular replacement pot for many Gibson Les Paul guitars.
9,90 €In Stock
3,50 € In stockAlpha 500K Linear Taper Mini Pot
Linear 500K OHM potentiometer. Fits most standard knobs.
3,50 €In stock
7,50 € In StockCTS 250K Split Shaft Pot
250K Audio Pot, CTS, split, knurled shaft with nut, lock and dress washer. Threaded bushing is 3/8 in. tall
7,50 €In Stock
4,50 € In Stock
3,50 € In stock
4,50 € In Stock
3,90 € In StockAllparts 25K Mini Pot
25K ohm mini pot, audio taper, split, knurled shaft, with nut and washer.
3,90 €In Stock
29,00 € In StockDunlop ECB024B Hot Potz II
This high quality wah pot features low wiper noise and extended life.
29,00 €In Stock
16,50 € In StockAllparts 500K Push-Push Pot
500K DPDT Push/Push Audio Taper Potentiometer, with Nut and Washer
16,50 €In Stock
8,50 € In StockEmerson Pro CTS 250K Split Shaft...
Emerson PRO CTS - 250K Short (3/8" - 9.52mm) Split Shaft PotentiometerLow Torque (Easy turning - for quicker/easier Volume & Tone swells. 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. Typically used on Strat Style guitars with single coil pickups, but can be used on any guitar that requires a 250K Split Shaft Potentiometer.
8,50 €In Stock
7,50 € In stockCTS 1 Meg Split Audio Pot
1 Meg ohm audio taper potentiometer CTS, split, knurled shaft, with hardware.
7,50 €In stock
13,00 € In StockGöldo Push-Pull Pot 500K Log
Thread: 10x8mm Housing: 16,5mm DC resistance: 500kOhm, log. Knurled split shaftWith on/on switch activated by pulling out. With 6 pins. Incl. washer, lock washer and nut.
13,00 €In Stock
7,50 € 1-2 months order timeCTS 500K Split Shaft Pot
500K Audio Pot, CTS, split, knurled shaft with nut, lock and dress washer. Threaded bushing is 3/8 in tall
7,50 €1-2 months order time
1,00 € Delivery time 1-2 weeksPot Stopper
Pot Stopper helps to keep your pedal settings intact. This add-on just prevents unwanted changes, you can still adjust the controls if you wish. Price per 1pc.
1,00 €Delivery time 1-2 weeks
9,00 € 1-2 months order timeEmerson Pro CTS 500K Split Shaft...
Emerson PRO CTS - 500K Short (3/8") Split Shaft PotentiometerLow Torque (Easy turning - for quicker/easier Volume & Tone swells. 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. Typically used on SG's, Flat Top Non Carved Top Les Pauls, PRS's, LP Jr's and many other models of guitars, but can be used on any guitar that requires a 500K...
9,00 €1-2 months order time
9,00 € 1-2 months order timeCTS Premium 500K Push-Pull Potentsiomeeter
500K CTS Push-Pull DPDT pot, audio taper, 10% tolerance, split shaft, with hardware.
9,00 €1-2 months order time
8,50 € Delivery time 1-2 monthsEmerson Pro CTS 500K Solid Shaft...
Emerson PRO CTS - 500K Short (3/8") Solid Shaft PotentiometerLow Torque (Easy turning - for quicker/easier Volume & Tone swells. 3/8" Solid Shaft for use with (1/4”) US Spec set-screw knobs. Typically used on Tele Style Guitars with Humbucker or P90 Pickups, but can be used on any guitar that requires a 500K Solid Shaft Potentiometer.
8,50 €Delivery time 1-2 months
