Kataloog
Laeb...
Multi-Color Coated Acoustic: 11 15 22...
Erinevad varuosad elektrikitarridele, basskitarridele ja akustilistele kitarridele
Replacement capacitors used in tone potentiometer circuitry for most Fender instruments. Hind 1tk. kohta!
Sprague "Orange Drop" #715P 600 volt Capacitor. Sold per 1pc. TAD Sprague/Orange Drops have low tolerances (3%), expanded temperature range (-55°C to +105°C) and with extra long wires suitable for point-to-point wiring. The distinctive tone of the TAD Orange Drops is full and smooth yet clear and shiny. Used for guitar tone control optimization....
Sprague "Orange Drop" #715P 600 volt Capacitor. Sold per 1pc. TAD Sprague/Orange Drops have low tolerances (3%), expanded temperature range (-55°C to +105°C) and with extra long wires suitable for point-to-point wiring. The distinctive tone of the TAD Orange Drops is full and smooth yet clear and shiny. Used for guitar tone control optimization....
Vintage-style thumb rest for use on Precision Bass and Jazz Bass models. Mounting hardware and template included.
Vintage style cloth covered wire set. Vintage Style, push back, cloth covered wire, 22 gauge, unshielded, single conductor, stranded wire with a waxed braided cotton outer insulation. Includes 3.5 ft of black GW-0820-023 wire and 3.5 ft of white GW-0820-025 wire.
Neck Plate, 4 Hole, for Guitar or Bass, Chrome. The plate is 2 inch x 2-1/2 inch. Screw holes are spaced 1-1/2 inch x 2 inch
Truss Rod Nut for Gibson Guitars, Brass 10-32
String Ferrules, 6 pieces for Guitar, Chrome plated, 25/64 inch diameter flange and requires a 5/16 inch diameter hole. Overall depth is 11/32 inches.
5/16 inch Box Truss Rod Wrench, suitable for many Gibson guitars. With Phillips Head Screwdriver on End. Socket length ~.375" Outside diameter of the socket is 11.05 mm. The distance from the top of the tool's arm to the end of the socket is 12 mm. Use these measurements to determine if this tool will reach your truss rod nut.
Jupiter BUMBLE BEE .022 mfd TIN FOIL Capacitors (USA) Vintage Style capacitors for tonecontrol in passive guitars and Bases. The historic Tone-Caps used by Gibson-Guitars in their classic designs of the 1950s and shape that sought after "smooth warm tone".
- Keeltekinnitusfiksaator nut clamping block to fix the strings- Universaalne- mõõdud 11,4 x 11,4 x 4,4 mm - saadaval kroomis, mustas ja kuldses värvilahenduses
Standard guitar fret wire pre-cut into 24 pieces and pre-radiused to 9.5".
9-volt battery compartment for acoustic guitar. Top portion outside the instrument is 50 x 30 x 4 mm. Bottom portion resting inside the instrument is 32.5 x 23 x 51 mm.
String Ferrules, 4 pieces, for Bass, Nickel, half inch flange diameter, 3/8 in. diameter hole required, 13/32 in. total length.
Back Plate & Switch Cover for Les Paul® Black 1-ply
Gotoh kvaliteet, autentne kulutatud disain. Sobilik F-tüüpi kitarridele. Komplektis kruvid.Pikkus: 63,8mm Laius: 51,1mm
Identsed klassikalised kontuurid ja väljalõiked. 1.6mm paksusega.
Narrow/Tall guitar fret wire pre-cut into 24 pieces and pre-radiused to 9.5".
Keep your contemporary or vintage instrument in great shape with genuine Fender® control plates for a variety of electric guitar and bass models. Used on nearly every Telecaster® (US and Mexico) manufactured from '52-Present.
Intonation tool for Original Floyd Rose tremolo Control of saddle position for accurate intonation
1970s vintage-style neck plate with engraved "F" logo, for use on most Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.
Truss Rod Cover to fit Gibson, Black, with White Trim
The two way truss rod wrench can be used on both the two way adjustable rod necks or single adjustable rod.