Catalog
Loading...
Power cables for guitar effect pedals, power supplies and amplifiers.
DC Power Cable with 20 cm / 7.87" length between each connector, black.
The RockBoard Flat Daisy Chain Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space as well as potrusions over the pedalboard's edge. Other than most...
High-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space. Other than most commonly available power cables, Rockboard Flat Power Cables do not use two parallel cable lines,...
The most widely used power supply cable. 2.1 mm connector fits to 99% of all pedals. Originally known as Boss-standard, today used by every manufacturer all around the world. Standard polarity, center negative. 46 cm (18") Right angle plugs.
CIOKS Flex 1 – 30cm (12″) with 5,5/2,1mm centre negative angled DC plug (black)
The RockBoard Flat Daisy Chain Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space as well as potrusions over the pedalboard's edge. Other than most...
Connect two pedals to one power supply output, without hum or noise. Voltage stays the same, but amperes are divided for two pedals according their current draw. This cable enables you to get more out from your power supply.
For pedals with higher performance requirements (mA) you can use a current doubling adapter to combine two isolated multi power supplies. Power supply: 2 x 2.1 mm coaxial plug. Pedal connector: 2.1mm coaxial socket. Polarity: Standard (centre minus). Length: 10 cm
CIOKS Flex 1 – 15cm (6″) with 5,5/2,1mm centre negative angled DC plug (black)
CIOKS Flex 1 – 50cm (20″) with 5,5/2,1mm centre negative angled DC plug (black)
CIOKS 3-way daisy chain Flex – three 5,5/2,1mm centre negative DC plugs, 50+30+30cm / 20″+12″+12″ (black)
The most widely used power supply cable. 2.1 mm connector fits to 99% of all pedals. Originally known as Boss-standard, today used by every manufacturer all around the world. 2.1mm Right Angle Barrel Plugs Standard Polarity (Centre Negative) 24" / 61cm Long
The RockBoard Flat Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables.
The RockBoard Flat Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables.
The most widely used power supply cable. 2.1 mm connector fits to 99% of all pedals. Originally known as Boss-standard, today used by every manufacturer all around the world. 2.1mm Right Angle Barrel Plugs Standard Polarity (Centre Negative) 36" / 92cm Long
Type 3 Flex cable is yellow and fitted with a centre negative 5,5/2,5mm DC plug. This is the cable you need if you want to power a Line6 Stomp from the CIOKS DC7 – simply combine this Flex cable with the Parallel Adapter Flex and you are good to go.
Some pedals use higher voltage than normal 9 volts. With this cable you can combine two outputs from your power supply. This way you can double the voltage to suit pedal requirements. Combine two 9 volt outputs for 18 volts, Combine two 12 volt outputs for 24 volts, 2,1 mm adapter, Normal polarity, center negative.
A battery snap works with any effect that runs on 9V battery including vintage pedals without power jacks.
A cable with 2.1mm right angle connectors and reverse (center positive) cable polarity made for JangleBox, some Fulltone pedals, some Moogerfooger and others.
Have a pedal that requires center positive polarity? Connect our 2.1mm reverse polarity cable to Zuma or Ojai and power your inverted-polarity pedals. Connector #1: 2.1mm straight Connector #1: 2.1mm female. Polarity: reverse (center positive). Length: 6″ (15cm)
Have a pedal with a 2.5mm jack that requires center positive polarity? Connect our 2.5mm reverse polarity cable to Zuma or Ojai and power your inverted-polarity pedals. Connector #1: 2.1mm straight. Connector #2: 2.5mm female. Polarity: reverse (center positive). Length: 6″ (15cm)
Have a pedal that requires 18V or 24V? Connect our voltage doubler cable to Zuma or Ojai and provide more juice for your pedals with higher voltage requirements. Power supply connectors: 2.1mm straight (2). Pedal connector: 2.1mm female. Polarity: standard (center negative). Length: 4″ (10cm)
Gain more isolated outputs with our 9″, 18", or 36" EIAJ cable. Connect an Ojai to your Zuma, or connect two Ojai units together for expanded flexibility. Or connect Ojai to the PS-124 power adapter. Connector #1: EIAJ-05 straight. Connector #2: EIAJ-05 right angle. Length: 9" (23cm). The EIAJ-05 type connector can not be used to plug directly into a...
CIOKS Split Flex – two 5,5/2,1mm centre negative DC plugs, 30 & 50cm / 12″ & 20″ (black)