Kataloog
Laeb...
Potentsiomeetrid kitarridele
CTS, Emerson, Allparts, 250K, 500K, push-pull ja muud.
250K Audio Pot, CTS, split, knurled shaft with nut, lock and dress washer. Threaded bushing is 3/8 in. tall
Convert split shaft pot to solid shaft pot, for pot knobs with fixing screw, Inside diameter approximately 6,3 mm. Price per 1pc.
500K Audio Pot, CTS, split, knurled shaft with nut, lock and dress washer. Threaded bushing is 3/8 in tall
500K CTS Mini Pot, Audio Taper, Split Shaft, with hardware
250K CTS Mini Pot, Audio Taper, Split Shaft, with hardware
Lineaarne 500K OHM potentsiomeeter. Sobib enamike standardsete nuppudega.
Emerson PRO CTS - 250K Short (3/8" - 9.52mm) Split Shaft PotentiometerLow Torque (Easy turning - for quicker/easier Volume & Tone swells. 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. Typically used on Strat Style guitars with single coil pickups, but can be used on any guitar that requires a 250K Split Shaft Potentiometer.
Pot Stopper helps to keep your pedal settings intact. This add-on just prevents unwanted changes, you can still adjust the controls if you wish. Hind ühe tk. kohta.
Emerson PRO CTS - 500K Short (3/8") Solid Shaft PotentiometerLow Torque (Easy turning - for quicker/easier Volume & Tone swells. 3/8" Solid Shaft for use with (1/4”) US Spec set-screw knobs. Typically used on Tele Style Guitars with Humbucker or P90 Pickups, but can be used on any guitar that requires a 500K Solid Shaft Potentiometer.
CTS brand 500K audio taper pots. 3/4 inch threaded bushing with 3/8 inch diameter. 24 spline split knurled shaft. Includes nuts, locks, and dress washers. Popular replacement pot for many Gibson Les Paul guitars.
25K ohm mini pot, audio taper, split, knurled shaft, with nut and washer.
Pot with hardware. 250K Mini Pot, Linear Taper, Split, Knurled Shaft, WIth Nut & Washer
This high quality wah pot features low wiper noise and extended life.
Wiring kit for Gibson ES-335 guitars. Contains the following Allparts replacement parts:1x EP-4365-000 Switchcraft Right Angle Toggle Switch2x CTS 500K Split Shaft Audio Pots2x EP-4986-000 - CTS 500K Linear Tone Pots1x EP-055L-000 Switchcraft Long Thread Input Jack2x EP-4382-000 - .022 MFD Capacitors2 feet of GW-0834-000 - 2 Conductor Wire1x Detailed...
500K DPDT Push/Push Audio Taper Potentiometer, with Nut and Washer
Emerson PRO CTS - 500K Short (3/8") Split Shaft PotentiometerLow Torque (Easy turning - for quicker/easier Volume & Tone swells. 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. Typically used on SG's, Flat Top Non Carved Top Les Pauls, PRS's, LP Jr's and many other models of guitars, but can be used on any guitar that requires a 500K...
500K CTS Push-Pull DPDT pot, audio taper, 10% tolerance, split shaft, with hardware.
Kolmesuunaline eeljoodetud juhtmete ja helipeade komplekt Telecaster tüüpi kitarridele. Sobib enamikele Ameerika Fender Telecaster-itele ilma modifikatsioonideta.
1 Meg ohm audio taper potentiometer CTS, split, knurled shaft, with hardware.
(3) Emerson PRO CTS Split Shaft w/ (3/8") .375" Shaft Potentiometers (1) Oak Grigsby 5-Way Switch (1) Switchcraft 1/4" Mono Input Jack (PREWIRED) (1) 0.047uf Emerson Paper in Oil Capacitor *(0.022uf are used with 500K-Ohm Pots Option)* (1) Volume Mod Wiring Diagram