Catalog
Loading...
Zuma R300 is the highest horsepower, most technologically advanced low profile effects pedal power supply. You get clean, rock-steady power for your 9V, 12V and 18V effects pedals in a pedalboard friendly, expandable package, giving you room to grow. Zuma R300’s ultra-low profile design means that it can fit under just about any pedalboard.
Have an existing Strymon effects pedal power supply? Gain five additional isolated pedal outputs with an Expansion Kit. Easily build a modular power system that can grow with your pedalboard.
Truetone’s 1 Spot Pro CS7 Guitar Pedal Multi Power Supply offers the best of 3 years of development and experimentation to produce clean, noise free power that can be used with most effects pedals. With 9V, 12V, and 18V outputs available, and switching power technology, the CS7 can be used anywhere and with a number of pedals, while the included cables...
The Truetone 1 Spot Pro CS12 Guitar Pedal Multi Power Supply combines 3 years of development and experimentation to deliver a powerful power brick that can be used with nearly any effects pedal. Offering 4-9v, 9v, 12V, 18V, and 9V AC outputs to connect with a range of pedals, the power supply also features a selection of cables to further enhance...
The Strymon Ojai R30 powers your most power-hungry pedals. Add this Ojai R30 Expansion Kit, and you double that pedalboard power. Each of the Ojai R30 Expansion Kit's five outputs pumps out a respectable 500mA for your power-hungry digital units. And its two adjustable outputs — 9, 12, and 18 volts — are ready for anything. And also like the R30, each...
Voodoo Lab Pedal Power X4 Expander Kitit adds four 9 V isolated outputs to an existing power supply using any available 12 V high current (400 mA - 1A) output. Housed in an ultra-compact aluminum chassis, the virtually weightless X4 easily mounts to even the most crowded pedalboards. Pedal Power X4 delivers the pure and reliable power necessary for pedals...
Voodoo Lab Pedal Power 3 is equipped with 8 isolated 500mA outputs delivering robust power for modern DSP effects and audiophile specs for the most sensitive vintage stompboxes. X-LINK ports for expanding with Pedal Power X4 or X8. Hand-built in the U.S.A.
The MOP-D10 is a multi-output power source that was developed by EHX engineers to provide a player with noise-free pedal operation. It features ten isolated 9VDC outputs that handle the most popular power requirements: 4x100mA, 2x250mA, 2x300mA and 2x400mA.
Boomerang Phrase Sampler Power SupplyAC/AC 9V 500mA
Pedal Power X8 is an ultra-compact high current isolated international voltage power supply that delivers reliable, zero-noise performance for pedals of all types. From vintage battery-operated stompboxes to modern high current DSP effects, the innovative hybrid DC transformer design of X8 integrates exotic organic and polymer filtering with noise-free...
Output voltage: 9 V DC 660 mA 2.1 x 5.5 mm Barrel plug - inside negative / outside positive EU plug
Works with all Strymon pedals, 9v DC centre negative 660 milliamp
Four 9V isolated high-current 400mA output sections (2 with 12V option) power Strymon, Eventide, Line 6 (excludes M9/M13), Boss Twin, TC Electronic Nova, Moog and more, Four 9V isolated 100mA output sections, All outputs compatible with 9V battery operated pedals, Linear regulation and toroidal transformer for lowest possible noise, easily fits small to...
Universal Power adapter, 4x 9 / 12V 100mA, 2x 9V 250mA, 2x 9V 100 mA or combination of multiple outputs at 18V or 24V, Two of the 8 outputs allow you to SAG the voltage from roughly 4V to 9V. Especially interesting for Fuzz and Wah pedals, High quality toroidal transformer, Very low background noise - all outputs are short-circuit protected and filtered,...
This power supply is light and pedalboard-friendly with ten fully isolated outputs ranging from 9V to 18V-including two variable 6V-15V outputs-and special noise-reduction circuitry for quiet operation.
Two powerful AC sections with 800mA each offer voltages 9, 12 and 16V AC. If you have one or two pedals in your setup, which requires an AC power source, AC10 is the right choice. It powers all vacuum tube pedals from Electro-Harmonix, Kingsley, older Blackstar HT series, the Whammy or Jamman. If you only have one AC pedal, you can convert one of the AC...
Power your pedals with Ojai R30 - the highest horsepower, most technologically advanced effects pedal power supply of its size. You get clean, rock-steady power for your 9V, 12V and 18V effects pedals in a low profile, expandable package, giving you room to grow. Ojai R30’s dual-stage topology, pre-regulated outputs, optically isolated feedback, and...
Original AC power supply For Tube Zipper, The Wiggler, Black Finger, English Muff'n, Tube EQ, and 12AY7 Mic Preamp. Also for the following discontinued items: LPB 2UBE, Classic Hot Tubes. European standard. 12V, 1000mA.
J. Rockett Juice Joint features:Lowers the ambient noise level and eliminates high-frequency noise from switching and transformer power supplies 7 Connections for effect pedals or further Juice Joints Input voltage: 9 V DC All inputs / outputs with 2.1 x 5.5 mm hollow plug, internal polarity (-) Status LED Metal casing Made in USA
Original Power Supply for Blackstar Fly 3 amplifier. 6.5V DC - 1.5A. EU version.
Voodoo Lab Pedal Power 3 PLUS is equipped with 12 isolated 500mA outputs delivering robust power for modern DSP effects and audiophile specs for the most sensitive vintage stompboxes. X-LINK ports for expanding with Pedal Power X4 or X8. Hand-built in the U.S.A.
Universal Audio power supply for UAFX pedalsIsolated 9V DC Center-negative 400mA 2.1/5.5 mm barrel connector