MIDI controller and switch control centre for a complete guitar set-up, very easy to use and program, programmable presets for 4 effects loops and 4 switches, 4x 9V outputs for external effect pedals, tuner out, MIDI out, link input for optional wah pad, includes power supply and 9V cable set for external effects pedals.
Guitar system controller, MIDI controller and switch control centre with 6 loops for a complete guitar setup, very easy to use and program, tap tempo function, 100 presets memory 10 banks, 10 presets each, MIDI output, 6x 9V DC outputs, tuner output, USB, 10 silent footswitches, external power supply
Analog wah-wah pedal with low bass switch, Q-Factor switch, deep switch, true bypass, 2x on/off switching modes (classic and touch). Powered via 9V battery or optional 9V DC power supply.
Classic Chorus, 24 bit DSP processor, Control for 2x Rate and 2x Depth, 2 Footswitch, Midi Input
Extension module for the MIDI 3x SPLITTER M3S with four additional Midi outs. MIDI signal and power supply come from the M3S.
MIDI controller and switch control centre for a complete guitar setup, very easy to use and program, tap-tempo function, 100x preset memory (10x banks, 10x presets each), MIDI output, 6x 9V DC outputs, tuner output, USB, 10x very silent footswitches, external power supply
Midi controller, LCD TFT display, 1000 presets, 6x loop for effect switching, 6x relay for amp switching, 6x 9V DC output for powering stompboxes, midi out and midi in connectors for controlling 10 midi devices independently on different midi channel, adjusting 20 different Midi Control Change numbers for each midi device (10 devices), 12x footswitches
Programmable foot controller dedicated for controlling the guitarists gear such as stompboxes, traditional tube amps, digital guitar effects, preamps and MIDI controlled DSP processors. Consist of the foot controller and the power module to which it is possible to connect the 6 LOOP EXTENSION (6LE) and the 2 x 4 SEPARATED 9V (PB-2) modules.
Wah Wah Pedal for bass guitar, analog, Low Bass Switch, Q Factor switch, Deep switch, True Bypass, Two on/off switching modes- classic on/off and Touch mode, 9V Battery or optional 9V DC Power supply
MIDI Wowee-Wah Pedal, analog, low bass switch, Q factor switch, deep switch, true bypass, 2x on/off switching modes (classic on/off and touch mode), function indicators, powered via 9V DC power supply (not included).
Classic full analog compressor with opto component which ensures the highest sound quality.the BC-1 works very well as a booster or booster-compressor on crunch and overdriven tones.Control for Comp A - Boos A - Comp B - Boost B, True Bypass Effect on/off and Compressor A/B Switch,,Midi input, Mode Switch Electric and Bass Guitar
Classic delay with applied MAX ANALOG technology. Analog voice circuit (adjustable attenuation of the high and low frequencies) and SMOOTH function enable SD-1 emulate the effect of classic analog and tape echoes. Backlighted foot knobs and TAP TEMPO function enable easy control on the stage. SD-1 can be also controlled via MIDI.
Dual Reverb, metal footswitches and backlit descriptions. True bypass mode based on optical elements. In addition to switching between two reverb settings (by A/B footswitch) it can be switched via on/off footswitch.
Full analog device that makes the use of wah-wah type effects more comfortable. Using a traditional wah-wah effect requires switching it ON and OFF, which forces the player to perform an additional operation during which playing is not possible. The wah-pad eliminates this operation.
The Wah-Pad WP performs the same functionality as the True Bypass Wah-Pad TBWP. The only difference is that it can be used only with one of the G LAB Guitar System Controllers GSC. So the Wah-Pad should be placed beneath a wah-wah effect and the Wah-Pad’s connector should be plugged into the GSC’s LINK or WAH-PAD connector.
2 bypass Loops, Midi thru,2 buttons for loops manual on/off switching, power supply and active loop indicators, power supply 9V DC optional
4 bypass Loops, Midi thru, 4 buttons for loops manual on/off switching, power supply and active loop indicators, power supply 9V DC (optional not included!)
3x Splitter Midi Splitterbox, 3x Midi Out, 1x Midi In, 9vDC powered by a 9V power supply
Line MIDI Switcher is a bidirectional, passive switcher of the audio signal with galvanic separation between A, B, C, D outputs/inputs. The LMS-1 can be used as amps switcher in one of four mode (guitar connected to an input of selected amp) without occurring of the ground loops (please see the attachment). The LMS-1 is controlled via MIDI interface and...
Signal Adapter, control signal level in the amp effects loop, Control for ATTENUATION and BOOST.
Amp Loop Adapter Adapter for Effect Loop on Guitar amps, Control for Boost and Atten, Switch for Boost on/off, Atten on/off - BO/AT on/off, Jack for send/return Loop Adapter cable, incl. Loop Adapter Cable 6m.
Loop Extension for GSC-5, 6 Effect Loops, Tuner Out, power supplying and controlling by the GSC controller with a use of a single cable, incl. EXT 80cm and EXT 50cm Cable, 4 pair hook- & loop tape