Furch Blue CM dreadnought 12-string made from all solid tonewoods. Top is made from high-grade western red cedar, and the back and sides feature high-quality African mahogany. Open-Pore Finish leaves wood pores exposed, which preserves the natural acoustic properties of tonewoods. Neck features the revolutionary Furch CNR System.
Warning: Last items in stock!
Back in stock:
|Type of guitar||12-String Guitar|
The premium nature of Furch Blue CM guitar is underscored by the fact that the soundboard is individually tuned using the voicing process, which enhances the guitar’s tonal properties to the highest level. Thanks to that, Furch Blue CM guitar has a crystalline clear, harmonically rich, balanced, and highly dynamic sound across the entire tonal spectrum.
Furch 12-string models offer a very rich and full sound and feature an extra string that doubles the six strings of a regular guitar. The extra strings for the low E, A, D, and G strings have a lighter gauge and are tuned one octave higher, whereas the B and high E strings are doubled by strings with the same gauge that are tuned to the same pitch.
Because the angle at which each string passes over the saddle has a considerable effect on the sound, the angle must be the same for all of the strings. The solution typically used on 12-string guitars, which uses two rows of six standard bridge pins, cannot achieve this because the angle at which the strings pass over the bridge is different for each of the two rows. Our proprietary solution features each of the main strings attached with a standard bridge pin, while each of the extra strings passes through a channel from the rear end of the bridge to a point behind the saddle that ensures that the string crosses the saddle at the same angle as the main string. This way, the string break angle is the same for each string, which translates into uniform resonance properties for all 12 strings.
Furch Blue CM guitar features Open-Pore Finish, a special thin finish that promotes the natural sonic qualities of tonewoods and provides an excellent level of surface protection. The finish accentuates low frequencies and produces a natural woody sound.
A high precision, dual-action truss rod maintains neck stability and allows for fine adjustment of the neck relief, bilaterally. The truss rod is housed in a highly rigid carbon casing which enables a very smooth and controlled neck relief, ensuring the best playability and enduring optimal setup.