Power cables for effects
Standard 2.1mm DC effects pedal power cables can be used with Zuma or Ojai to power most effects pedals available. Connector #1: 2.1mm straight. Connector #2: 2.1mm right angle. Polarity: standard (center negative). Quantity: 5 pack. Available in 18″ (46cm) and 36″ (92cm) lengths. Choose length before adding to cart.
A battery snap works with any effect that runs on 9V battery including vintage pedals without power jacks.
A cable with a 2.1mm right angle barrel and a 3.5mm right angle mini plug with standard (tip positive) polarity. The 3.5mm mini plug cable connection is compatible with older/vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat series), Klon Centaur, and vintage (non-LED) Voodoo Lab pedals.
Power Cable, 10 ft , 3 meters, black, 3 pronge, 16awg., IEC connector
Have a pedal that requires center positive polarity? Connect our 2.1mm reverse polarity cable to Zuma or Ojai and power your inverted-polarity pedals. Connector #1: 2.1mm straight Connector #1: 2.1mm female. Polarity: reverse (center positive). Length: 6″ (15cm)
Have a pedal with a 2.5mm jack that requires center positive polarity? Connect our 2.5mm reverse polarity cable to Zuma or Ojai and power your inverted-polarity pedals. Connector #1: 2.1mm straight. Connector #2: 2.5mm female. Polarity: reverse (center positive). Length: 6″ (15cm)
Have a pedal that requires 18V or 24V? Connect our voltage doubler cable to Zuma or Ojai and provide more juice for your pedals with higher voltage requirements. Power supply connectors: 2.1mm straight (2). Pedal connector: 2.1mm female. Polarity: standard (center negative). Length: 4″ (10cm)
Gain more isolated outputs with our 9″, 18", or 36" EIAJ cable. Connect an Ojai to your Zuma, or connect two Ojai units together for expanded flexibility. Or connect Ojai to the PS-124 power adapter. Connector #1: EIAJ-05 straight. Connector #2: EIAJ-05 right angle. Length: 9" (23cm). The EIAJ-05 type connector can not be used to plug directly into a...
The most widely used power supply cable. 2.1 mm connector fits to 99% of all pedals. Originally known as Boss-standard, today used by every manufacturer all around the world. Standard polarity, center negative
Connect two pedals to one power supply output, without hum or noise. Voltage stays the same, but amperes are divided for two pedals according their current draw. This cable enables you to get more out from your power supply.
Some pedals use higher voltage than normal 9 volts. With this cable you can combine two outputs from your power supply. This way you can double the voltage to suit pedal requirements. Combine two 9 volt outputs for 18 volts, Combine two 12 volt outputs for 24 volts, 2,1 mm adapter, Normal polarity, center negative.
A cable with 2.1mm right angle connectors and reverse (center positive) cable polarity made for JangleBox, some Fulltone pedals, some Moogerfooger and others.